Saturday, August 17, 2013
Lamborghini HomeLink System Europe Programming Guide
Short Description
The HomeLink system provides a convenient way to replace up to three remote controls with a single built-in component. This innovative feature learns the radio frequency codes of most current remote controls used to activate garage doors, property gates, security systems, and home or office lighting.
In the Lamborghini Gallardo the HomeLink control panel is located under the sun visor on the driver’s side.
The corresponding HomeLink transmitter is located at the front left) in the bumper, under the headlamp.
Please follow the safety instructions and apply the handbrake. Switch on the ignition. Do not start the engine!
1. Press and hold the two outside buttons I + III - releasing only when the diode begins to flash after approximately 20 seconds. This procedure erases the factory-set default codes and does not have to be followed to program additional remote controls.
2. Press the appropriate HomeLink button I, II or III which you want to program and keep holding it until the diode starts flashing slowly.
…
Get the file Download here
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.