How to install a reverse camera to a vw golf mk 7 in approximately 1hr. pretty easy job.. How to retrofit the oem backup camera for mk6 vw golf hatch badge (also applies to mk5 rabbits) difficulty: 2/5 introduction if equipped with this option, the backup camera is under the hatch badge/release lever/handle. when you shift into reverse, the handle opens and the camera peeks out.. To successfully install a rear-view camera, first remove your vehicle’s rear license plate and interior trunk panel. using a power drill, punch a small hole through the exposed license plate mounting area and run your camera’s power and video cord through it. attach a bare wire power cable to your camera’s power connector, then strip your car’s reverse light wires and splice them with.
Installing a golf mark vi rear view camera (rvc) into a golf mark vi how to retrofit the oem backup camera for mk6 vw golf hatch badge (also applies to mk5 rabbits) […] retro-fit reversing camera? january 25, 2014 at 12:44 pm · reply. I'm in process of installing a reverse camera to the oem headhunt, all going well. changed settings in vcds etc. however my issue is that the cameras i have ordered are pal so they don't work correctly on the headhunit.. Install: add gentex mirror (with 3.3" lcd built-in display) + backup camera if anyone out there is like me, i didn't want to splurge the extra $2500-3000 for navigation and backup camera when purchasing the vehicle..
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.